Olympus VR-320 - Manual (Page 14)

14 EN
2
Follow the on-screen instructions on your
computer.
If nothing is displayed on the camera screen even
after connecting the camera to the computer, the
battery may be exhausted. Leave the camera
connected to the computer until the battery has
charged, then disconnect and reconnect the camera.
Connecting the camera Connecting the camera
Indicator lamp
USB cable (supplied)
Computer (on and running)
Multi-connector
3
Register your Olympus product.
Click the “Registration” button and follow the on-
screen instructions.
4
Install OLYMPUS Viewer 2 and [ib] computer
software.
Check the system requirements before beginning
installation.
Click the “OLYMPUS Viewer 2” or “OLYMPUS ib”
button and follow the on-screen instructions to
install the software.
●
●
●
OLYMPUS Viewer 2
Operating
System
Windows XP (Service Pack 2 or later) /
Windows Vista / Windows 7
Processor Pentium 4 1.3 GHz or better
RAM
1 GB or more (2 GB or more
recommended)
Free Hard
Drive Space
1 GB or more
Monitor
Settings
1024 × 768 pixels or more
Minimum 65,536 colors
(16,770,000 colors recommended)
[ib]
Operating
System
Windows XP (Service Pack 2 or later) /
Windows Vista / Windows 7
Processor
Pentium 4 1.3 GHz or better
(Pentium D 3.0 GHz or better required
for movies)
RAM
512 MB or more (1 GB or more
recommended)
(1 GB or more required for movies — 2 GB
or more recommended)
Free Hard
Drive Space
1 GB or more
Monitor
Settings
1024 × 768 pixels or more
Minimum 65,536 colors (16,770,000
colors recommended)
Graphics
A minimum of 64 MB video RAM with
DirectX 9 or later.
* See online help for information on using the software.
5
Install the camera manual.
Click the “Camera Instruction Manual” button and
follow the on-screen instructions. ●