Olympus E-100 RS - Manual (Page 20)

20
Press (Moniter button). The same sign
on the finder will be displayed on the monitor.
The displayed subject will switch between the
viewfinder and monitor each time you press
this button.
SHOOTING AND PLAYBACK BASICS
TURNING THE POWER ON/OFF
OFF : Power off
● Turn the camera's power switch off.
Put on the lens cap.
ON : Power on
● Remove the lens cap, set the Mode dial
to the desired mode and set the Power
switch to ON.
RESET :
● Move the switch to reset momentarily
and then release, the power switch will
automatically move back to ON. All
settings except the mode setting menu
will be reset to the factory-preset (initial
settings).
● Hold the switch in the reset position for
over 3 seconds, and all settings, except
for the date and time, will be reset to the
initial settings.
(Monitor button)
TAKING PICTURES WHILE USING THE MONITOR