Olympus STYLUS 7010 - Manual (Page 28)

28 EN
To focus on a moving subject
continuously (AF Tracking)
1 Hold the camera to align the AF target mark
on the subject and press l.
2 When the camera recognizes the subject,
the AF target mark automatically tracks
the subject movement to focus on it
continuously.
3 To cancel the tracking, press l or any
other buttons.
Depending on the subjects or the shooting
conditions, the camera may be unable to lock
the focus or fail to track the subject movement.
When the camera fails to track the subject
movement, the AF target mark changes to red.
Recording sound when shooting still
images [R]
B CAMERA MENU X R
: K s
Submenu 2 Application
OFF No sound is recorded.
ON
The camera automatically starts
recording for approx. 4 seconds after
taking the picture. This is useful for
recording notes or comments about
the picture.
When recording, aim the microphone (p. 6) at
the source of the sound you want to record.
Reducing the blur caused by the camera
shake when shooting
[IMAGE STABILIZER] (still images) /
[DIS MOVIE MODE] (movies)
B CAMERA MENU X IMAGE STABILIZER /
DIS MOVIE MODE
: K s I A
Submenu 2 Application
OFF
The image stabilizer is deactivated.
This is recommended for shooting
when the camera is fi xed in place on
a tripod or other stable surface.
ON The image stabilizer is activated.
The camera’s default settings are [IMAGE
STABILIZER] (still images) to [ON] and [DIS
MOVIE MODE] (movies) to [OFF].
There may be a noise coming from inside the
camera when the shutter button is pressed
with [IMAGE STABILIZER] (still images) set to
[ON].
Images may not be stabilized if camera shake
is too severe.
When the shutter speed is extremely slow,
such as when taking still shots or taking
pictures at night, the stabilizer may not be as
effective.
When shooting while the [DIS MOVIE MODE]
(movies) is set to [ON], the image will be
enlarged somewhat before saving.
Brightening the subject against backlight
[SHADOW ADJ]
B CAMERA MENU X SHADOW ADJ
: K s I A
Submenu 2 Application
OFF
Shoots without using [SHADOW
ADJ].
ON
The camera fi nds a person’s face that
has been darkened by backlight and
makes it appear brighter for taking
the picture. (Point the camera toward
the subject. Check the frame that
appears around the face detected
by the camera, and then press the
shutter button to take the picture.)
For some subjects, the frame may not appear
or may take some time to appear.
When set to [ON], [ESP/n] (p. 27) is
automatically fi xed to [ESP], and [AF MODE]
(p. 27) is automatically fi xed to [FACE
DETECT].