Olympus FE-4000 - Manual (Page 29)

29 EN
Select the settings for the functions while referring to “Using the Menu” (p. 3).
Rotating images [y]
J
PLAYBACK MENU
X y
Submenu 2 Application
U +90°
The image is rotated 90°
clockwise.
V 0° The image is not rotated.
t –90°
The image is rotated 90°
counter-clockwise.
1 Use mn to select an image.
2 Use kl to select the rotation
direction.
3 If necessary, repeat Steps 1 and 2 to
make settings for other images, and press
the B button.
The new picture orientations will be saved
even after the power is turned off.
Adding sound to still images [R]
J
PLAYBACK MENU
X R
Submenu 2 Application
YES
The camera adds (records) sound
for approx. 4 seconds while
playing back the image. This
is useful for recording notes or
comments about the image.
NO No sound is recorded.
1 Use mn to select an image, and press the
B button.
2 Aim the microphone toward the sound
source.
Microphone
3 Use kl to select [YES], and press
the B button.
Recording starts.
●
Erasing images [ K ERASE]
K
ERASE
Submenu 1 Application
SEL. IMAGE
Images are individually selected
and erased.
ALL ERASE
All images in the internal memory
or card will be erased.
When erasing pictures in the internal memory,
do not insert the card into the camera.
When erasing pictures from the card, insert
a card into the camera in advance.
To individually select and erase
images [SEL. IMAGE]
1 Use kl to select [SEL. IMAGE], and
press the B button.
2 Use klmn to select the image to be
erased, and press the B button to add a
R mark to the image.
1
4
2
5
3
6
IN
OK MENU BACK GO
SEL. IMAGE
D
R mark
3 Repeat Step 2 to select the images to be
erased, and then press the
D button to
erase the selected images.
4 Use kl to select [YES], and press
the B button.
The images with a R mark are erased.
To erase all images [ALL ERASE]
1 Use kl to select [ALL ERASE], and
press the B button.
2 Use kl to select [YES], and press
the B button.
Saving print settings to the image data
[
L PRINT ORDER]
L
PRINT ORDER
“Print reservations (DPOF)” (p. 37)
Print reservation can be set only for still
images that are recorded to the card.
●