Olympus FE-4000 - Manual (Page 21)

21 EN
Using the self-timer
After the shutter button is pressed all the way
down, the picture is taken after a short delay.
1
Press the
Y button.
OFF
P
OK OK
N ORM
SET
SELFTIMER
OFF
ON
Y
12M
2
Use kl to select the desired
setting option, and press the B
button to set.
Option Description
OFF The self-timer is deactivated.
ON
The self-timer lamp turns on for
approx. 10 seconds, then blinks
for approx. 2 seconds, and then
the picture is taken.
Self-timer shooting is automatically canceled
after one shot.
To cancel the self-timer after it starts
Press the
Y button again.
Increasing the brightness of
the monitor ( Backlight boost)
Press
 in shooting mode. The monitor
becomes brighter. If there is no operation for 10
seconds, the previous brightness resumes.