Olympus E-PM1 - Manual (Page 81)

81 EN
Customizing camera settings
10
10
Camera settings can be customized using the custom and accessory menus.
The
c Custom menu is used to fi ne-tune camera settings. The # Accessory Port
menu is used to adjust settings for accessory port devices.
Before Using the Custom/Accessory Port Menus
The Custom and Accessory Port menus are only available when the appropriate option is
selected for the [
c/# Menu Display] item in the setup menu.
1
Press the MENU button to display the top menu.
2
Select [SETUP] using HI and press Q.
3
Select the d setup menu tab (P. 80) using FG and press I.
4
Select [ c/# Menu Display] using FG and
press I.
5
Select the desired menu using FG and press
I.
6
Select [On] using FG and press Q.
The selected menu will be displayed. •
X
j ±0 k±0
W
11.05.01 14:01
2
1
Setup Menu
English
5sec
c/# Menu Display
Firmware
Rec View
Back Set
c Menu Display
On
Back Set
Q
j ±0 k±0
11.05.01 14:01 X
2
1
c
W English
Setup Menu
Rec View
c/# Menu Display 5sec
Firmware
Back Set
[ c] tab
Custom Menu options
R AF/MF MENU c
R
Option Description g
AF Mode Choose the AF mode. 36
Full-time AF If [On] is selected, the camera will continue to focus even
when the shutter button is not pressed halfway.
—
AF Area Choose the AF target mode. 37
Reset Lens When set to [On], this resets the focus of the lens (infi nity)
each time the power is turned off.
—
Bulb Focusing Normally focus locks during the exposure when manual
focus (MF) is selected. Select [On] to allow focusing using
the focus ring.
—
Customizing camera settings