AEG F99709M0P - Manual (Page 36)

Problem Possible solution
There are stains and dry water drops on
glasses and dishes. • The released quantity of rinse aid is not
sufficient. Adjust the rinse aid selector to
a higher position.
• The quality of the rinse aid can be the
cause.
The dishes are wet. • The programme does not have a drying
phase or has a drying phase with low
temperature.
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the
cause.
• The quality of the multi-tablets can be
the cause. Try a different brand or acti-
vate the rinse aid dispenser and use
rinse aid and multi-tablets together.
Refer to "Hints and tips" for
other possible causes.
13. TECHNICAL INFORMATION
Dimensions Width / Height / Depth
(mm) 600/850/625
Electrical connection
1) Voltage (V) 220-240
Frequency (Hz) 50
Water supply pressure Min. / Max. bar (MPa) 0.5 (0.05) / 8 (0.8)
Water supply
Cold water or hot water
2) max 60 °C
Capacity Place settings 12
Power consumption Left-on mode (W) 0.99
Power consumption Off-mode (W) 0.10
1) Refer to the rating plate for other values.
2) f the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy), use the
hot water supply to decrease energy consumption.
14. ENVIRONMENTAL CONCERNS
Recycle the materials with the symbol .
Put the packaging in applicable
containers to recycle it. Help protect the
environment and human health and to
recycle waste of electrical and electronic
appliances. Do not dispose appliances
marked with the symbol with the
household waste. Return the product to
your local recycling facility or contact
your municipal office.
www.aeg.com 36