AEG F99709M0P - Manual (Page 26)

Programme Degree of soil
Type of load Programme phases Options
5)
All Prewash
1) With this programme you have the most efficient use of water and energy consumption for crockery
and cutlery with normal soil. (This is the standard programme for test institutes).
2) The appliance senses the degree of soil and the quantity of items in the baskets . It automatically ad-
justs the temperature and the quantity of water, the energy consumption and the programme duration.
3) This programme has a high temperature rinsing phase for better hygiene results. During the rinsing
phase, the temperature stays at 70 °C for at least 10 minutes.
4) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
5) With this programme you can quickly rinse dishes to prevent remains of food to bond on dishes and
odours to form in the appliance. Do not use detergent with this programme.
5.1 Consumption values
Programme
1) Water
(l) Energy
(kWh) Duration
(min)
9.9 0.91 195
8 - 14 0.6 - 1.4 40 - 150
13 - 15 1.3 - 1.6 140 - 160
8 - 9 1.0 - 1.2 55 - 65
9 0.8 30
4 0.1 14
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
5.2 Information for test
institutes
For all the necessary information for test
performance, send an email to:
[email protected]
Write down the product number (PNC)
that is on the rating plate.
6. SETTINGS
6.1 Programme selection
mode and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
In the user mode you can change some
of the appliance settings. These settings
will be saved until you change them
again.
In user mode, the following settings can
be changed:
• The level of the water softener
according to the water hardness.
• The activation or the deactivation of
the acoustic signal for end of
programme.
www.aeg.com 26