AEG F99709M0P - Manual (Page 29)

7. OPTIONS
Activate or deactivate the
options before the start of a
programme. You cannot
activate or deactivate the
options while a programme
is running. If one or more
options are set, make sure
that the related indicators
are on before the
programme starts.
Some options are not
compatible with each other.
When you set a programme
and activate options that are
not compatible with each
other, the appliance will
automatically deactivate one
or more options.
7.1 Multitab
Activate this option when you use multi-
tablets that contain salt, rinse aid and
detergent. They can also contain other
cleaning or rinsing agents.
This option deactivates the release of
salt and rinse aid from the respective
containers. The salt and rinse aid
indicators do not come on.
With the use of this option the
programme duration can increase.
How to activate Multitab
Press Option until the indicator comes
on.
What to do if you want to stop
using multi-tablets
Before you start to use separately
detergent, salt and rinse aid do the
following procedure.
1. Set the highest level of the water
softener.
2. Make sure that the salt and rinse aid
containers are full.
3. Start the shortest programme with a
rinsing phase. Do not add detergent
and do not load the baskets.
4. When the programme is completed,
adjust the water softener according
to the water hardness in your area.
5. Adjust the released quantity of rinse
aid.
7.2 ÖKO PLUS
This option decreases the temperature
of the last rinsing phase and
consequently also the energy
consumption (approximately -25%).
Dishes can still be wet once the
programme is completed.
The duration of the programme will be
shorter.
How to activate ÖKO PLUS
Press Option until the indicator
comes on.
If the option is not applicable to the
programme, the related indicator does
not come on or it flashes quickly for a
few seconds and then goes off.
The display shows the updated
programme duration.
8. BEFORE FIRST USE
1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If not,
adjust the level of the water softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
ENGLISH 29