English – AEG AR 4021 BT User Manual

Page 88

ENGLISH

Press and hold

*/+ / AS/PS

(21).

SEARCH

is displayed.

The unit starts automatic search. When a station is

found (by the scan function), it will be played for a

few seconds before the scan of the next station. The

respective preset flashes.

Press one of the numeric buttons (8) to access the

respective station.

Cycle Through Saved Stations

Press

*/+ / AS/PS

(21). All stations are briefly played in

sequence.

Press

*/+ / AS/PS

(21). When the desired station comes

up. This station stays tuned into.

Alternative Frequencies (AF)

AF is an RDS (Radio Data System) function and is only

available for FM stations. The unit searches in the back-

ground the best frequency for the selected station.

Press the

AF/MON

button (22) to turn this function on

or off.

is displayed: Function is activated and RDS information

is received.

flashes: No RDS information is received.

is not displayed: Function is deactivated.

Program Type (PTY)

Some FM stations transmit besides the station name also

the program type.

You can search for stations with certain genres.

Press the button

PTY

(17).

Select the desired PTY code by pressing the

but

tons (23). The PTY genre is displayed.

Such program types may be for example:

SPORT

NEWS

POP M

CLASSICS

After selecting a PTY code press the button (23).

PTY

SEEK

is shown on the display. The unit searches for sta-

tions which correspond to the set PTY code and stops if a

corresponding station has been found. If no station with

the respective PTY genre is found,

PTY NONE

is displayed.

The PTY function is deactivated if the selected PTY genre

is no lon-ger received. Or press the button

PTY

(17) to end

the function early.

Traffic Announcement (TA)

Hold down the

EQ/TA

(19) button to switch this mode

on or off.

is displayed with activated mode.

In the TA mode, switching from any other operation

mode is done immediately to a radio station sending

traffic announcements at that time.

TRAFFIC

is shown

on the display. The volume level is adjusted to the

value set in the menu for the transmission of traffic

information.

Briefly hold down the

EQ/TA

(19) button during

playback of traffic radio to interrupt the TA function

without switching the function off.

General CD Functions

Anti-shock Function (ESP - Electric Shock Protection)

The unit is equipped with anti-shock function. This func-

tion compensates for bumps on uneven streets and ensure

uninterrupted playback.

Insert and Remove CD

Press the release button (1) to flip down the control

panel.

Insert the CD with the label up into the CD drive Flip

the control panel back up. The display shows

CDP

PLAY

. CD playback starts.

To eject the CD, press the

(28) button when the

control panel is flipped down. The CD is ejected. The

unit switches to Radio mode.

Remove the CD from the drive. The CD will be retracted

again after 10 seconds if it is not removed from the

slot; in this case playback does not start automatically.

NOTE

Please note:

►

A large variety of burner and compression software

is on the market; there are differences in quality

between CDs and home-burnt CDs.

Furthermore, the music industry does not have fixed

standards (copy protection).

For this reason it can happen that in exceptional

cases play-back problems for CDs and MP3/WMA CDs

occur. This is

not

a malfunction of this unit.

Select CD Mode (with CD inserted)

Repeatedly press

PAIR/MOD

(4) until

CDP PLAY

displayed.

Skip Mode

Press

(23) or (23), to skip to the next or previous

track. The title number and the elapsed playing time

are shown on the display.

Fast Forward/Rewind

Press and hold

(23) or (23) to start fast forward or

rewind function.

Pause

Press

PAU

(9), to pause playback.

S-PAUSE

is shown on

the display.

Press

PAU

(9) again to resume playback.

Repeat Mode

Press

RPT

(11) to repeat the current title.

S-RPT

and

the current title are displayed. Press again to return to

normal playback mode.

Only for MP3 files and CDs in MP3 Format:

Keep the

RPT

button (11) briefly pressed to repeat the

current folder.

D-RPT

and the current title are shown.

Press the button to restore normal playback.