Broilmaster DPSBSS - Manual (Page 9)

Page 9 DPSBSS
Propane Cylinder Safety
Liquid propane gas has a long history of safe use
when the safety precautions provided in this
manual are followed.
F
AILURE TO FOLLOW THESE SAFETY PRECAUTIONS
COULD RESULT IN A FIRE OR EXPLOSION CAUSING
PROPERTY DAMAGE OR PERSONAL INJURY
.
Propane gas cylinders should always be handled,
stored, and transported with extreme caution in a
secured upright position.
Never attempt to use or repair a propane gas
cylinder that has been damaged. Never attempt
to use or repair a cylinder with a faulty or damaged
valve outlet. A cylinder that has been dropped,
dented, or otherwise damaged must be replaced.
A propane gas cylinder should never be
transported in the passenger area of a vehicle.
Keep cylinders out of direct sunlight and never
apply any other source of direct heat to them.
When refilling your cylinder, always insist on a
reputable, qualified gas dealer. Your propane gas
cylinder is filled by weight, and should never
exceed eighty (80%) percent of its weight limit. If
the cylinder is not completely empty, the gas
dealer must make necessary adjustments to
ensure it is not overfilled. Never use an overfilled
Propane gas cylinder.
Your grill must be stored outdoors in a well
ventilated area if the cylinder is attached to it.
Disconnected cylinders must have a threaded
valve plug tightly installed and must not be stored
in any building, garage, or other area.
Flammable materials (gasoline, grill covers, etc.)
must not be stored in the cylinder enclosure.
Cylinder Storage
C
AUTION
: N
EVER USE LIQUID PROPANE GAS IN A GRILL
DESIGNED FOR NATURAL GAS
,
OR NATURAL GAS IN A
GRILL DESIGNED FOR LIQUID PROPANE GAS
. Q
UESTIONS
REGARDING DIFFERENT TYPES OF GASES SHOULD BE
DIRECTED TO YOUR LOCAL GAS COMPANY
.
Always store propane cylinders in a secured
upright position, out of the reach of children.
Installation must conform to local codes or, in the
absence of local codes, with the National Fuel Gas
Code, ANSI Z223.1. In Canada, installation shall
be in accordance with CAN/CGA-B149.2 Propane
Installation Code, or CAN/CGA-B149.1 Natural
Gas Installation Code, and local codes where
applicable. Consult your local gas company or
Propane gas dealer for code regulations and
recommended procedures.
Always use the pressure regulator and hose
assembly supplied with your propane gas grill.
W
ARNING
: B
ROILMASTER
® G
AS
G
RILLS AND
S
IDE
B
URNERS REQUIRE LIQUID PROPANE CYLINDERS
EQUIPPED WITH AN
O
VERFILL
P
ROTECTION
D
EVICE
(OPD). A
N OVERFILLED OR IMPROPERLY FILLED
PROPANE CYLINDER CAN BE DANGEROUS
.
Connection Requirements
Note: Not all valve and cylinder combinations are
compatible. Check warning tag on valve and
cylinder as well as external fitting threads.
All Broilmaster ® pressure regulators and hose
assemblies require propane cylinders with a Type
1 connection device as illustrated by Figure 8.
F
IGURE
8
P
ROPANE
G
AS
C
ONNECTION