BT Diverse 3010 - Manual (Page 62)

58
Can’t get through, even though a
dialling tone can be heard
You may be set to the wrong signalling
method. To change between TONE
and PULSE dialling, see ‘Using your
Diverse 3010 Micro with a switchboard’,
page 52.
Handset beeps
Are the handset batteries low?
You will hear a beep every 30 seconds.
If the handset display is flashing?
You will hear four short beeps when
you press the PHONE button. Check
you are still in range of your base
station.
Buzzing noise on my
Radio/TV/Answering Machine/PC
Diverse is too close and is causing
interference. Move it further away.
When connected to a
switchboard
You can’t get a connection or you
get the wrong connection after
speed dialling
Check you have selected the correct
dialling mode. See page 52.
Have you entered a pause after the
access code? See page 54.
Note
If you are still experiencing difficulty,
please call the Diverse Helpline on
08457 908070 .
HELP