BT Diverse 3010 - Manual (Page 53)

49
Using multiple base
stations and handsets
It is possible to build your Diverse
3010 Micro into a much larger phone
system with the addition of up to 4 base
stations.
When planning to use a handset at
more than one base station, it is
recommended that you:
• Assign a number to each base station,
from 1 to 4.
• Number each handset (1 to 6)
registered at each base station.
• Register the handsets at base station
2 (and 3, and 4 if used) in the same
order as used for base station 1.
• Activate the display of the base station
numbers on each handset, as shown
on the next page.
Note
If you move out of range of the displayed
base station, and within range of another
base station, your radio link will be
automatically set up (provided your
handset has been registered with the new
base station.)
If, however, you move out of range of the
displayed base station, and within range
of another base station during a call you
will lose your call connection.
Note
The handset display shows you if the
handset is located within range of a
registered base station. If the base station
flashes continuously, it means the handset
is not within range of a registered base
station. If the base station is not flashing,
you are in range.
Using multiple base
stations and handsets
When the handset has been registered
at two or more base stations (see ‘To
register a handset’ page 47)
, you can
choose between three options:
You can use up to six handsets on each
Diverse base station and up to four base
stations with your Diverse handset.
The handset supplied with your first
base station is already registered as
handset 1 and your first base station is
base station 1.
MUL
TIPLE