Binatone SPEAKEASY COMBO 2005 TRIPLE User Manual

Page 32

You may need to change the recall (flash) time if your phone is connected

to a PBX. The recall time options are SHORT (the default value of 100ms),

1. Press

and to select BS SETTINGS.
2. Press and to select FLASH TIME.
3. Press and to select your desired flash time

(SHORT, MEDIUM,

LONG, with the current setting indicated by an

4. Press

to confirm.

A 4-digit system PIN code is used for changing the system settings of the

base station. It is used to protect your phone against unauthorised use.

The default system PIN code is 0000.
1. Press

and to select BS SETTINGS.
2. Press and to select CHANGE PIN.
3.

Press

to show PIN?

4. Enter the old system PIN.
5.
6.

Press

to show CONFIRM?, and enter the new system

Note: If the new PIN entered in Step 6 is not the same as the new system

PIN entered in Step 5, you must enter the new system PIN at

Step 5 again.

7. Press

to confirm.

MEDIUM (300ms) or LONG (600ms).

asterisk to the right).

Press

to show NEW PIN?, and enter the new system PIN.

PIN again.

Press

to show CONFIRM?

Press

to confirm, and the phone will be reset to its default

settings.

Press

to show PIN?

Enter the 4-digit system PIN (default value 0000).

You can reset your phone to the default settings. After reset, all your

personal settings, call list entries and redial list entries will be deleted,

but your phonebook remains unchanged.
1. Press

and to select DEFAULT.

8.4.3 Change the Recall (Flash) Time

8.4.4 Change the System PIN Code

8.4.5 Reset your Cordless Handset

This manual is related to the following products: