Binatone SPEAKEASY COMBO 2005 TRIPLE User Manual

Page 28

Alarm Settings

You can set an alarm time on the handset. When an alarm is set, the

is shown on the handset display.

When the alarm time is reached, the and “ALARM ON” flash

on the handset display and the alarm melody plays for 45 seconds. You

can press any key to disable the alarm. If the snooze function is activated,

the alarm will sound again at the end of the snooze period of seven minutes.
Note:

A key press will still disable the alarm even if the handset keypad is

The alarm volume level is the same as the settings of the handset ringer

volume. If the handset ringer is set to VOLUME OFF, the alarm still

c. During an external call or internal call, if an alarm is set and when the

alarm time is reached, the and “ALARM ON” will still

flash. An alarm tone will be emitted from the earpiece to notify user the

alarm time is reached. Once the user presses any key or presses and

d. During paging or ringing, the alarm will not sound when the alarm time is

reached. However, if the snooze function is enabled and there is no

paging or ringing, the alarm will sound again at the end of the snooze

1. Press

and to select HS SETTINGS

Press

to show ALARM.

3. Press

and to select ON/OFF.

sounds at VOLUME 1 level.

4. Press

to confirm.
Note: If ON is selected, you will be asked to set the alarm time.

locked when the alarm rings.

holds to disable the alarm, it will revert to the call duration screen.

period.

Press

and then enter the date in the format you set in

Section 8.1.1.

5. Press

to confirm.

Note: If the date has been set before, the curre nt date will display,

otherwise it will show the date starting from

“

”after power

1. Press

and to select HS SETTINGS.
2. Press and to select DATE & TIME.
3. Press and to select SET DATE.

01-01-11

8.1.4 Set the Date

up or a reset.

8.2

8.2.1 Turn on/off the Alarm

This manual is related to the following products: