Binatone SPEAKEASY COMBO 2005 TRIPLE User Manual

Page 31

If you turn on the Auto Answer, you can

answer a call automatically by just

1. Press

and to select HS SETTINGS.

2. Press

and to select AUTO ANSWER.
3. Press and to turn on or off the auto answer

4. Press

to confirm.

lifting the cordless handset off the charger without having to press any key.

feature.

Base Settings

This operation should only be necessary if one of your handsets becomes

Note: You cannot de-register the handset that you are currently using.

1. Press

and to select BS SETTINGS.
2. Press and to select DELETE HS.
3.

Press

to show PIN?

4. Enter the 4-digit system PIN.
5.

Press

and the first registered handset number is shown.

Press to step through the list of registered handsets and

Press

to confirm, and the chosen handset will be

select the one that you want to de-register.

faulty or lost and needs to be replaced.

You will need to enter the 4-digit system PIN in order to de-register a

handset from the base station. (The default PIN is 0000.)

A de-registered handset will have the antenna icon flashing and

de-registered.

1. Press

and to select BS SETTINGS.
2. Press and to select DIAL MODE.
3. Press and to select TONE or

PULSE.

4. Press

to confirm.

You should normally leave the dialling mode at its default setting of TONE

(also called DTMF) unless the phone is connected to an old exchange that

only recognises PULSE dialling.

(The current setting is indicated by an asterisk to the right.)

8.3.6 Set the Auto Answer

8.4

8.4.1 De-register a Handset

8.4.2 Change the Dial Mode

This manual is related to the following products: