A&D WM:PD4000136 Ambulatory Blood Pressure Monitor - Manual (Page 9)

Page 7
Product overview Display
Display
Sleep sign
Auto mode sign
Low battery sign
Full memory sign
SYS/INTERVAL
DIA
PULSE/TIME
Pulse display
Sign
Setup sign of
automatic measurement
Systolic Blood
Pressure display
Clock display
Setup sign of
display and clock
Error display
ex. "Set the clock"
Diastolic Blood
Pressure display INTERVAL
TIME PULSE
DIA
SYS
Sign Name Functions
Arrow
A Automatic
measurement
S Sleep
B Low battery
M Full memory
The arrow points to the kind of current display in the measure-
ment result and function mode.
" A " is displayed when the automatic measurement is selected.
When you press and hold the AUTO ON/OFF key, this sign is
turned on or off alternately.
When you press the AUTO ON/OFF key while in mode II of the
automatic measurement, " S " is displayed or turned off alternately.
With the " S " turned off, the time interval is 15 minutes.
With the " S " turned on, the time interval is 30 minutes.
When the recorder can not operate all functions due to low
battery, this sign is displayed. The clock is still displayed. Please
replace the batteries at once.
When data memory is at full capacity, this sign is displayed. In
this case, you can not perform another measurement. Transfer
the data save in other media and delete. Then the " M " turns off.
Symbols
Turning on the recorder.
Turning off the recorder.
Direction guide to install batteries.
Direct current.
SN Serial number.
1997 Date of manufacture.
Attention symbol. "See instruction for use."
Recorder, Cuffs and tubings are designed to have special protection
against electric shocks.