AEG SCS51800F0 - Manual (Page 21)

Ha
K
8 mm
Remove the brackets
and mark a distance of 8
mm from the outer
edge of the door where
the nail must be fitted
(K).
Hb
Place the small square
on the guide again and
fix it with the screws
supplied.
Align the kitchen furni-
ture door and the appli-
ance door by adjusting
the part Hb.
Hb
Hd
Press the part (Hd) on
the part (Hb).
Do a final check to make sure that:
• All screws are tightened. • The sealing strip is attached tightly to
the cabinet.
• The door opens and closes correctly.
8. NOISES
There are some sounds during normal
running (compressor, refrigerant circula-
tion).
ENGLISH
21