AEG SCS51800F0 - Manual (Page 18)

1
2
Install the appliance in
the niche.
Push the appliance in
the direction of the ar-
row (1) until the upper
gap cover stops against
the kitchen furniture.
Push the appliance in
the direction of the ar-
row (2) against the cup-
board on the opposite
side of the hinge.
4 mm
44 mm
Adjust the appliance in
the niche.
Make sure that the dis-
tance between the ap-
pliance and the cup-
board front-edge is 44
mm.
The lower hinge cover
(in the accessories bag)
makes sure that the dis-
tance between the ap-
pliance and the kitchen
furniture is correct.
Make sure that the
clearance between the
appliance and the cup-
board is 4 mm.
Open the door. Put the
lower hinge cover in po-
sition.
I
I
Attach the appliance to
the niche with 4 screws.
18 www.aeg.com