AEG L61271WDBI - Manual (Page 32)

A
B
9. Make sure to identify the different
sizes and the positions of the sound
barriers. Refer to the illustration:
A (FRONT) = Front of the appliance
B (BACK) = Rear of the appliance
x4
A
B
10. – Remove the adhesive strip from
the silent barriers.
– Attach the four barriers to bottom
of the appliance. Refer to the il-
lustration.
– Make sure that the barriers are se-
curely attached.
Attach the sound barriers at a
room temperature.
11. Pull up the appliance in vertical po-
sition.
12. Remove the power supply cable and
the drain hose from the hose hold-
ers.
32 www.aeg.com