Before first use, 1 language setting, Change the language after the first activation – AEG L61271WDBI User Manual
Page 16
Programmes
Load
(Kg)
Energy
consump-
tion (kWh)
Water con-
sumption
(litre)
Approxi-
mate pro-
gramme
duration
(minutes)
Remain-
ing mois-
ture (%)
1)
Cottons 60 °C
9
1.6
69
168
43
Cottons 40 °C
9
1.0
69
164
43
Synthetics 40
°C
4
0.6
48
105
35
Delicates 40
°C
4
0.7
58
86
35
Wool/Hand
wash 30 °C
2
0.35
57
61
30
Standard cotton programmes
Standard 60
°C cotton
9
0.90
65
233
43
Standard 60
°C cotton
4.5
0.58
40
198
43
Standard 40
°C cotton
4.5
0.46
40
178
43
1) At the end of spin phase.
Off Mode (W)
Left On Mode (W)
0.05
0.05
The information given in the charts above are in compliance with the EU Com-
mission regulation 1015/2010 implementing directive 2009/125/EC.
8. BEFORE FIRST USE
1.
To activate the drain system, put 2 li-
tre of water in the main wash com-
partment of the detergent dispens-
er.
2.
Put a small quantity of detergent in
the main wash compartment of the
detergent dispenser. Set and start a
programme for cotton at the highest
temperature without laundry. This
removes all possible dirt from the
drum and the tub.
8.1 Language setting
The first time you activate the appliance,
the display shows the default language
and tells you to confirm it or change it:
• Turn the programme knob to set the
desired language.
• When the display shows the necessary
language, touch button
6
to confirm
the selection.
Change the language after the
first activation
1.
Touch button
11
and button
10
at
the same time for some seconds.
2.
When display shows the language
set, turn the programme knob to set
the new language.
3.
Touch button
6
to confirm the se-
lection.
16 www.aeg.com