AEG Solo 15 - Manual (Page 16)

15
• Press to “PERSOnAL SET” and then press to select.
• Press to “HAnDSET TOnE” and then press to select.
• Press to “KEY BEEP” and then press to select.
• Press to select “On” or “OFF” and then press to confirm.
>A confirmation tone is played.
• Press to return to standby mode.
13.4 Rename the Handset
You can personalise your handset by renaming it.
• From the home screen, press
.
• Press to “PERSOnAL SET” and then press to select.
• Press to select “HAnDSET nAME”.
>The current handset name is displayed.
• Press to delete the letters one by one and enter the new name (maximum 10 characters).
• Press to confirm.
>A confirmation tone is played.
• Press to return to standby mode.
13.5 Set the Display Language
You can change the display language on your handset. The default setting is EnGLISH.
• From the home screen, press
• Press to “PERSOnAL SET” and then press to select.
• Press to “LAnGUAGE” and then press to select.
• Press to select your preferred language and then press to confirm.
>A confirmation tone is played.
• Press to return to standby mode.
Note:
Once the display language is set, the handset will switch to display in the selected language immediately.
13.6 Set Auto Hang-up
This function enables you to end a call automatically by simply placing the handset back on the base unit
or charging pod. By default, the Auto Hang up feature is On.
• From the home screen, press
• Press to “PERSOnAL SET” and then press to select.
• Press to “AUTO HAnG-UP” and then press to select.
• Press to select “On” or “OFF” and then press to confirm.
>A confirmation tone is played.
• Press to return to standby mode.
14 ADVAnCED SETTInGS
14.1 Handset Registration
Important:
When you purchase your phone system, all handsets are already registered to your base, so you do not
need to register them.
Handset registration is only necessary when you buy extra handsets or if a handset has become faulty.
You can register up to four handsets to one base station, with each handset’s number (1 to 4) shown on
its display.
Note:
Each handset can only be registered to one base.
You need to enter the Master PIn before you can register or unregister handsets. The default Master PIn
is 0000.