AEG Solo 15 - Manual (Page 10)

9
Note:
If there is no answer from the called handset, or you wish to cancel the intercom call before it is answered,
press
to return to the external call.
• Press on the called handset to answer the internal call, where both internal callers can talk.
• When the intercom call is connected, you can choose from the following options on the originating
handset:
>Press and hold for 2 seconds to connect both handsets to the call in conference mode.
>Press on either handset to terminate the intercom on that handset, and leave the external call
connected to the other handset.
7.14 Transfer an External Call to another Handset
• During the call, press to put the external call on hold.
>Intercom is established immediately if there are only 2 registered handsets.
>If there are more than 2 registered handsets, the handset numbers which are available for intercom
will be displayed.
• Press the handset number you wish to call or press to call all handsets.
Note:
If there is no answer from the called handset, or you wish to cancel the intercom call before it is answered,
press
to return to the external call.
• Press on the called handset to answer the internal call, where both internal callers can talk.
• Press on the originating handset to transfer the external call to the called handset.
>The external call is transferred.
8 DIRECT ACCESS MEMORY
There are 2 direct access memories (Keys 1 & 2) in addition to the phonebook memory. A long press on
the keys in standby mode will automatically dial the stored phone number.
8.1 Add Direct Access Memory
• From the home screen, press .
• Press to select “PHOnEBOOK”.
• Press to “DIRECT MEM.” and then press to select.
• Press to “KEY 1” or “KEY 2” and then press to select.
>“nO nUMBER” is displayed if it is empty. Otherwise, the stored name is displayed.
• Press to enter the menu options.
• Press again to select “EDIT nUMBER”.
>“EnTER nAME” is displayed if it is empty. Otherwise, the stored name is displayed.
• Enter the name of the contact and press .
>If you make a mistake, press to delete the last character entered.
>“EnTER nUMBER” is displayed. Otherwise the stored number is displayed.
• Enter the number of your contact and press .
>If you make a mistake, press to delete the last digit entered.
>A confirmation tone is played.
• Press to return to standby mode.
8.2 Delete Direct Access Memory
• From the home screen, press .
• Press to select “PHOnEBOOK”.
• Press to “DIRECT MEM.” and then press to select.
• Press to “KEY 1” or “KEY 2” and then press to select.
>“nO nUMBER” is displayed if it is empty. Otherwise, the stored name is displayed.
• Press to enter the menu options.
• Press to “DELETE” and then press to select.