Product description, Before first use, 1 general overview – AEG DE4003000M User Manual
Page 7: 2 oven accessories, 1 initial cleaning, 2 setting the time, 3 preheating

4. PRODUCT DESCRIPTION
4.1 General overview
1
1
2
3
4
5
6
2
2
5
5
6
4
4
3
6
1
2
3
4
5
6
3
1
Electronic programmer
2
Heating element
3
Oven lamp
4
Fan and rear wall heating element
5
Heating element
6
Shelf positions
4.2 Oven accessories
• Oven shelf
For cookware, cake tins, roasts.
• Deep roasting pan
To bake and roast or as pan to collect
fat.
• The roasting pan grid
To put in the deep roasting pan.
5. BEFORE FIRST USE
WARNING!
Refer to the Safety chapters.
5.1 Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Refer to chapter "Care and
Cleaning".
5.2 Setting the time
The oven only operates after
time set.
When you connect the appliance to the
electrical supply or in case of a power
cut, the Time function indicator flashes
automatically.
To set the current time use
or
.
After approximately 5 seconds, the flash-
ing stops and the display shows the time
of day set.
You can only change the Time
of day
if :
• the switch-on lock is not on
• none of the clock functions
Duration
or End
is set
• no oven function is set.
5.3 Preheating
Preheat the empty appliance to burn off
the remaining grease.
Preheat the two ovens. Heat up one
oven at a time.
Set the functions listed below, if applica-
ble.
1.
Set the function
and the maxi-
mum temperature.
ENGLISH
7