AEG DE4003000M - Manual (Page 12)

SYM-
BOL
FUNCTION DESCRIPTION
Time of day To set, change or control the time of day.
• If you set a clock function, the symbol
flashes for approximately 5 seconds. In
these 5 seconds, touch
or to set
the time.
• If you set the time, the symbol contin-
ues to flash for approximately 5 sec-
onds. After these 5 seconds, the sym-
bol comes on. The time starts to count
down.
7.2 Setting the clock functions
1. Switch on the appliance.
2.
Use again and again until the dis-
play shows the necessary clock func-
tion and the related symbol, for ex-
ample Minute Minder
.
3. Use or to set the necessary
time.
You can hear an acoustic signal for 2
minutes when the time is comple-
ted, “00.00” and the related function
indicator flash. The appliance
switches off.
4. Use any sensor field to switch off the
acoustic signal.
With Minute Minder the oven
must be switched on to set the
clock function.
With Duration and End the
oven switches off automatically.
With Duration
and End
you must set the oven function
and the temperature first, then
you can set the clock function.
7.3 Heat+Hold (if applicable)
To keep the prepared food warm for 30
minutes, after the cooking is completed.
Switching on Heat+Hold
1.
Set clock functions Duration and/
or End .
2. Use Selection again and again,
until the display shows the symbol
Keep warm
.
3.
Use , the display shows “00:30”
4. When the set oven function is com-
pleted, a signal sounds and Heat
+Hold starts. The set oven function
operates at 80°C for 30 minutes. The
oven then switches off automatically.
The temperature for the set oven
function must be above 80°C.
8. ADDITIONAL FUNCTIONS
8.1 Cooling fan
When the appliance operates, the cool-
ing fan switches on automatically. If you
switch off the appliance, the cooling fan
continues to operate until the appliance
cools down.
8.2 Switch-on lock
WARNING!
When the switch-on lock is set,
you can not operate the oven.
Switching on the switch-on lock
1. Switch on the appliance. No oven
function must be set.
2. Use Selection and at the same
time, until the display shows
“SAFE”. The switch-on lock is
switched on.
Switching off the switch-on lock
1. If necessary, switch on the appliance.
2.
Use Selection and at the same
time, until the display stops to show
"SAFE". The switch-on lock switches
off.
12 www.aeg.com