AEG DE4003000M - Manual (Page 11)

If you do not change this temperature in
less than approximately 5 seconds, the
appliance starts to heat.
When the appliance operates at
the set temperature, an acoustic
signal sounds.
You can change the oven func-
tion while the oven operates.
6.6 Changing the oven
temperature
Press the or to set the tempera-
ture.
Checking the oven
temperature
Press to display the current
temperature of the oven.
6.7 Switching off the oven
function
Use again and again, until the display
does not show an oven function.
6.8 Heat- up indicator
If you switch on an oven function, the
bars on the display come on one by one.
The bars show that the oven tempera-
ture increases.
6.9 Residual heat indicator
When you switch off the oven, the bars
on the display show the residual heat.
7. CLOCK FUNCTIONS
7.1 Clock functions
1
7 6 5
2 3 4 1
Time of day
2
Duration
3
End
4
Minute Minder
5
Clock function selection
6
Increase the value
7
Decrease the value
SYM-
BOL
FUNCTION DESCRIPTION
Minute Minder To set a countdown (max. 99 minutes). This
function has no effect on the operation of the
appliance.
Duration To set how long the appliance has to be in op-
eration.
End To set the switch-off time for an oven function.
You can use Duration and End at the same
time, if the appliance is to be switched on and
off automatically later.
ENGLISH
11