AEG Charger LK 1204 - Manual (Page 27)

GB 27
End charging process
1 unplug from the aC outlet
2 disconnect the charging clamp (black) from the vehicle’s body, in exceptions
from the negative battery terminal (marked n or -)
3 disconnect the positive charging clamp (red) from the positive battery terminal
(marked P or +)
CleanInG, Care and serVICe
your charger can be kept functional for years with minimum care
▪
after the charging process is completed, clean the clamps To prevent corrosion,
wipe off any battery fluid that has come into contact with the clamps
▪
roll up the cables properly when you store the charger This helps to prevent
damage to the cables and the charger
▪
occasional cleaning of the charger casing with a soft cloth keeps the surface
shiny and helps to prevent corrosion
▪
store the charger in a clean and dry location
Caution!
only qualified technical personnel should change the plug or the connecting cables
This will guarantee the safety of the device is maintained
If the product is no longer suitable for use dispose of it in an environmentally
friendly manner in accordance with your local ordinances