AEG Style 15 - Manual (Page 8)

8
7.6 Rings to answer
To set the number of rings before the machine answers a call.
tPress the menu button
.
>The display shows “OPTIONS MENU“.
tPress the up or down button until de display shows “RINGS TO ANSWER”.
tPress the OK button to confirm.
tPress the up or down button to select “TOLL SAVER”, “2”, “3”, “4”, “5”, “6”, “7” , “8” or
“9” rings.
>The default setting is 5.
>Use “TOLL SAVER” when checking for messages from a remote location.The answering machine
responds after the 2nd ring only if you have a new message recorded. If there are no new
messages, the phone will answer after the 4th ring. You can then hang up after the 3rd ring to
avoid paying for the call.
tPress the OK button to confirm.
tContinue with programming, or press the stop button to return to standby mode.
7.7 Remote access
The remote access requires a three-digit code that you need to enter if you call when away from home
to check your messages. The default is “321“. You can change it to any three digits you want.
tPress the menu button
.
>The display shows “OPTIONS MENU“.
tPress the up or down button until de display shows “REMOTE ACCESS”.
tPress the OK button to confirm.
>The current three-digit code is shown, with the first digit blinking.
tPress the up or down button to set the first digit of the remote access code.
tPress the OK button to confirm.
>The second digit of the code will be blinking.
tPress the up or down button to set the second digit of the remote access code.
tPress the OK button to confirm.
>The third digit of the code will be blinking.
tPress the up or down button to set the third digit of the remote access code.
tPress the OK button to confirm the new remote access code setting.
the stop button to return to standby mode.
7.8 TAM HD on/off setting
Two different compression rates (on and off) are provided for you to select the recording quality / total
recording time of incoming messages. With the compression rate set to on the recording quality will
be higher, but it will only save up to about 20 minutes of messages. With the compression rate set to
off the recording quality will be lower, but it will save up to about 40 minutes of messages.
tPress the menu button
.
>The display shows “OPTIONS MENU“.
tPress the up or down button until de display shows “TAM HD: ON” (or “TAM HD: OFF”).
tPress the OK button to confirm.
>The “ON“ (or “OFF“) will be blinking.
tPress the up or down button to select “ON“ or “OFF“.
tPress the OK button to confirm the TAM HD setting.