AEG Style 15 - Manual (Page 7)

7
UK
tPress the up or down button until de display shows “SET TIME/DATE”.
tPress the OK button to confirm.
>The year will be blinking.
tPress the up or down button to set the year.
tPress the OK button to confirm.
>The month will be blinking.
tPress the up or down button to set the month.
tPress the OK button to confirm.
>The date will be blinking.
tPress the up or down button to set the date.
tPress the OK button to confirm.
>The hour will be blinking.
tPress the up or down button to set the hour.
>When setting the hour it is in 24 hour mode only.
tPress the OK button to confirm.
>The minutes will be blinking.
tPress the up or down button to set the minutes.
tPress the OK button to confirm time and date setting.
tContinue with programming, or press the stop button to return to standby mode.
7.3 Set flash time
You may need the flash function if your phone is connected to a PBX. Some PBX may need a longer
time, in which case you can change the setting from the options menu.
tPress the menu button .
>The display shows “OPTIONS MENU“.
tPress the up or down button until de display shows “SET FLASH TIME”.
tPress the OK button to confirm.
tPress the up or down button to select “100MS” (default), “300MS”, “600MS” or “1000MS”.
tPress the OK button to confirm.
tContinue with programming, or press the stop button to return to standby mode.
7.4 LCD contrast
tPress the menu button .
>The display shows “OPTIONS MENU“.
tPress the up or down button until de display shows “LCD CONTRAST”.
tPress the OK button to confirm.
tPress the up or down button to select your comfortable display viewing level (1-5). The default
setting is 3.
tPress the OK button to confirm.
tContinue with programming, or press the stop button to return to standby mode.
7.5 Message length
To set the maximum recording time for each incoming message or memo message on the answering
machine.
tPress the menu button
.
>The display shows “OPTIONS MENU“.
tPress the up or down button until de display shows “MESSAGE LENGTH”.
tPress the OK button to confirm.
tPress the up or down button to select 1 or 2 minutes.
>The default setting is 2 minutes.
tPress the OK button to confirm the message length setting.
tContinue with programming, or press the stop button to return to standby mode.