AEG BE7314401 - Manual (Page 28)

Problem Possible cause Solution
The appliance does not heat up. The appliance is deactivated. Activate the appliance.
The appliance does not heat up. The time of day is not set. Set the clock. Refer to "First
setting the time of day".
The appliance does not heat up. The necessary settings are not
set.
Make sure that the settings are
correct.
The appliance does not heat up. The automatic switch-off is ac-
tivated.
Refer to „Automatic switch-
off“.
The appliance does not heat up. The fuse is released. Make sure that the fuse is the
cause of the malfunction. If the
fuse releases again and again,
contact a qualified electrician
The oven lamp does not oper-
ate.
The oven lamp is defective. Replace the oven lamp.
The display shows F102. The door lock is defective. • Close the door correctly
• Deactivate the appliance
with the house fuse or the
safety switch in the fuse box
and activate it again.
• If the display shows F102
again, contact the Service
Center.
The display shows an error code
that is not in this list.
There is an electrical fault. • Deactivate the appliance
with the house fuse or the
safety switch in the fuse box
and activate it again.
• If the display shows the er-
ror code again, contact the
Service Center.
If you cannot find a solution to the problem yourself, contact your dealer or the service
centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the
front frame of the appliance cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
TECHNICAL DATA
Voltage 220-240 V
28 Technical data