AEG BE7314401 - Manual (Page 23)

You can set the settings menu only when the appliance is off.
Activate the Settings menu:
1.
If necessary, deactivate the appliance .
2. Touch and hold for three seconds.
The display shows "SET1" and "1" flashes.
3. Touch / to set the setting.
4. Touch .
5. Touch / to change the value of the setting.
6. Touch .
Automatic switch-off
For safety reasons the appliance deactivates automatically after some time:
• if an oven function operates.
• if you do not change the oven temperature.
Oven temperature Switch-off time
30 °C - 120 °C 12.5 h.
120 °C - 200 °C 8.5 h.
200 °C - 250 °C 5.5 h.
250 °C - maximum °C 3.0 h.
After an automatic switch-off, touch a sensor field to operate the appliance again.
The Automatic switch-off works with all oven functions, apart from Light, Slow Cook, core
temperature sensor, Duration, End, Time delay.
Brightness of the display
There are two modes of display brightness:
• Night brightness - when the appliance is deactivated, the brightness of the display is
lower between 10 PM and 6 AM.
• Day brightness:
– When the appliance is activated.
– If you touch a sensor fields during the night brightness (apart from ON / OFF), the dis-
play goes back to the day brightness mode for the next 10 seconds.
– If the appliance is deactivated and you set the Minute Minder. When the Minute
Minder function ends, the display goes back to the night brightness.
Cooling fan
When the appliance operates, the cooling fan activates automatically to keep the surfaces
of the appliance cool. If you deactivate the appliance, the cooling fan can continue to oper-
ate until the appliance cools down.
Additional functions 23