AEG Voxtel S105 - Manual (Page 10)

10
XX
XX steady on: playing the current XX old recorded
message.
XX fl ashing: playing the current XX new recorded incoming
message.
A1/A2
Steady on: playing the current outgoing message (OGM)
where A1 is the answer & record OGM and A2 is the
answer only OGM.
XX/An
Flashing XX alternately with An: currently recording the
new XX incoming message.
rA
Flashing: remote access is in progress from a handset or
via the external line.
LX
Steady on: indicates the current volume level where X is
from 1 to 8.
6 INSTALLING YOUR PHONE
6.1 Connecting the base station (see P5)
• Plug the power adapter and line cord into the base station.
• Plug the power adapter into a 210 - 230 V ac, 50/60 Hz mains socket and
the other end of the line cord into your telephone line socket.
Warning:
• Always use the line cord provided in the box. Other line cords may not
be compatible and may not work.
• Only use the power adapter supplied.
• The base unit needs mains power for normal operation, not just for
charging the handset batteries.
6.2 Installing and charging the batteries (see P3)
• Slide open the battery compartment cover.
• Place the 2 batteries with the correct polarity, as shown.
• Slide the battery compartment cover back.
• Put the handset on the base and charge for 15 hours before fi rst time
use. The handset beeps when charging starts.