Asus Pentium 4 1U Rackmount Server AP160R-S - Manual (Page 23)

ASUS AP160R-S 1U Rackmount Server 23
2.4 Installing system memory
The motherboard has four Dual
Inline Memory Module (DIMM)
sockets that support up to 8GB
system memory using registered
ECC PC2100/PC1600 DDR DIMMs.
DIMM sockets location
DDR DIMM sockets
Install a DIMM
1. Unlock a DIMM socket by
pressing the retaining clips
outward.
2. Align a DIMM on the socket
such that the notch on the
DIMM matches the break on
the socket.
3. Firmly insert the DIMM into the
socket until the retaining clips
snap back in place and the
DIMM is properly seated.
Unlocked Retaining Clip
Remove a DIMM
1. Simultaneously press the
retaining clips outward to
unlock the DIMM.
2. Remove the DIMM from the
socket.
A DDR DIMM is keyed with a notch so it fits in only one direction.
DO NOT force a DIMM into a socket to avoid damaging the DIMM.
CAUTION