Asus Pentium 4 1U Rackmount Server AP160R-S - Manual (Page 19)

ASUS AP160R-S 1U Rackmount Server 19
Placement Direction
When installing the motherboard,
make sure that you place it into the
chassis correctly. The edge with the
external ports goes to the rear part
of the chassis.
Motherboard Screws
Place seven (7) screws in the holes
indicated by circles to secure the
motherboard to the chassis. Do not
overtighten the screws. Doing so
may damage the motherboard.
2.2 Motherboard Placement
The motherboard and other internal components of the AP160R-
S server are already installed as indicated in section
“1.4 Internal
Features”. Refer to the motherboard user’s manual for detailed
technical information about the motherboard.
NOTE
You must remove the protruding screws (indicated by black circles
above) on the serial port, VGA port, and high-density SCSI
connector before installing or removing the motherboard.
Otherwise, you cannot properly install or remove the motherboard.
NOTE
Place this side
towards the rear
of the chassis