beautypg.com

The inlet hose, Water-stop device, Water drainage – AEG L61270WDBI User Manual

Page 34

background image

THE INLET HOSE

20

O

20

O

20

O

45

O

45

O

45

O

• Connect the hose to the appliance.

Turn the inlet hose only left or right.
Loose the ring nut to set it in the cor-
rect position.

• Connect the water inlet hose to the

cold water tap with 3/4 thread.

CAUTION!
Make sure that there are no leaks
from the couplings.

Do not use an extension hose if
the inlet hose is too short. Contact
the service centre for the replace-
ment of the inlet hose.

Water-stop device

A

The inlet hose has a water stop device.
This device prevents water leaks in the
hose because of its natural ageing. The
red sector in the window «A» shows this
fault .
If this occur, close the water tap and con-
tact the service centre to replace the
hose.

WATER DRAINAGE

There are different procedures to connect
the drain hose:

34 www.aeg.com