AEG L61270WDBI - Manual (Page 32)

6. Put one of the polystyrene packaging
elements on the floor behind the ap-
pliance. Carefully put down the appli-
ance with the rear side on it. Make
sure not to damage the hoses.
1
2
7. Remove the polystyrene protection
from the bottom.
8. Pull up the appliance in vertical posi-
tion.
9. Remove the power supply cable and
the drain hose from the hose holders.
10. Remove the three bolts. Use the key
supplied with the appliance.
11. Pull out the plastic spacers.
32 www.aeg.com