AEG L61270WDBI - Manual (Page 33)

12. Put the plastic caps in the holes. You
can find these caps in the user man-
ual bag.
WARNING!
Remove all the packaging and the
transit bolts before you install the
appliance. We recommend that you keep the
packaging and the transit bolts for
when you move the appliance.
POSITIONING AND LEVELLING
• Install the machine on a flat hard floor.
• Make sure that air circulation around
the machine is not impeded by carpets,
rugs etc.
• Carefully level by screwing the adjusta-
ble feet in or out.
• After having levelled the appliance,
tighten the lock nuts.
• The appliance must be level and stable.
Never place cardboard, wood or
similar materials under the ma-
chine to compensate for any un-
evenness in the floor.
If it is impossible to avoid positioning the
machine next to a gas cooker or coalburn-
ing stove, an insulating panel covered
with aluminium foil on the side facing the
cooker or stove, must be inserted be-
tween the two appliances.
Before placing it on small tiles, apply a
rubber coating.
The water inlet hose and the drain hose
must not be kinked.
CAUTION!
The machine must not be installed
in rooms where the temperature
can drop below 0°C.
ENGLISH
33