Alliance, Accusplit – Accusplit AL1590 User Manual
Page 2
Eat Right! Walk More! Live Well! The ACCUSPLIT Lifestyle
EXCLUSIVE DISTANCE ACCURACY TIP
Maximize the accuracy of your distance measurement by:
• Walking a measured 0.5 or 1.0 mile/km. (We recommend
that you use a
1
⁄
4
-mile/400 meter track like those found at a
high school).
• Compare the DISTANCE recorded to the measured
distance. If the pedometer shows you walked LESS than you
actually did, reset your STEP LENGTH to a longer setting. If
the pedometer shows you walked MORE than you actually
did, reset the STEP LENGTH to a shorter setting.
• RESET display to zero.
• Walk the track again to test the adjustment, and re-adjust
accordingly.
• Once adjusted DO NOT ALLOW ANYONE ELSE TO CHANGE
THE SETTING because the Activity Pedometer is now set for
your style.
• You are now ready to walk any route, change that route freely
and still get an accurate measurement of distance for your
fitness or recreation program.
REPLACING THE BATTERY
When the display starts to dim or goes blank, it is time to
replace the battery. Your pedometer uses one Type LR44
1.5 volt alkaline battery.
To replace:
1. Insert a coin into the slot on the bottom of the case,
and twist counterclockwise to loosen the case front. Lift
case front away.
2. Using a pen or other thin object, push battery sideways
out of its holder. Replace it with a new battery. The
battery’s positive (+) terminal should be FACE UP while
you put it into the pedometer.
3. Align case front over the pedometer and press gently
to snap cover back into place, starting with top.
REGISTER NOW
Please return your
AL1590 Registration to the Repair
Center address in the warranty, and
we will let you know about future
products.
Email (preferred)
User
ACCUSPLIT®
ALLIANCE
1590
NO-PROOF-OF-PURCHASE LIMITED WARRANTY
See label inside the lid of your pedometer