Xerox WorkCentre C2424-2636 - Manual (Page 10)

10 S CAN TO PC D ESKTOP : I MAGE R ETRIEVER 5.2 FOR X EROX W ORK C ENTRE C2424
Close command
To close Image Retriever, right-click the Image Retriever icon to
display its menu. Click the “Close” command.
Image Retriever Status Display
The Image Retriever icon in the Windows system tray shows the
current status of the program, by way of one or two light indicators
in the bottom. In the Professional Edition (see illustration below),
two LEDs are displayed: the left one represents the status of e-
mail polling, the other displays that of folder monitoring as follows:
This information is also displayed in the Screen Tip, specifying the
name of the application first (Image Retriever), then e-mail polling
and finally the folder monitoring status.
In the Special Edition of Image Retriever, the program icon has
only one LED (folder monitoring status).
Please note that Image Retriever will continue running even if an
error persists (e.g. connection is lost with a folder or e-mail inbox).
In this case the corresponding light indicator remains red until the
error is resolved. Then it switches to the color corresponding to
the current Image Retriever settings.
Errors occurring during configuring the program through the
“Image Retriever Settings” dialog are always reported by error
messages.
To get information about errors, right click on the Image Retriever
icon to display its menu, then choose the “View Log” command.
Color Status
dark green monitoring
light green processing
grey inactive
red error