Accessing the network menu, Using the network menu options, Dhcp/bootp – Konica Minolta magicolor 2530DL User Manual
Page 89: Dhcp/bootp 81, Network menu 81 accessing the network menu
Network Menu
81
Accessing the Network Menu
Use the following series of keystrokes at the printer to access the Network
menu options on your printer. This menu provides access to all of the config-
urable network items.
Using the Network Menu Options
If the printer is connected to a network, the following settings should be spec-
ified. For details about each setting, contact your network administrator.
"
When manually setting the IP address, Subnet Mask, and Gateway
turn off DHCP and BOOTP first.
DHCP/BOOTP
Press this
key . . .
(until) the message window reads . . .
READY
SPECIAL PAGES
MENU
NETWORK
Purpose
If there is a DHCP or BOOTP server on the network, speci-
fies whether the IP address is automatically assigned by
the DHCP or BOOTP server and other network information
is loaded.
Options
DHCP SET: ON
BOOTP SET: OFF
DHCP SET: OFF
BOOTP SET: ON
DHCP SET: OFF
BOOTP SET: OFF
Default
DHCP SET: ON, BOOTP SET: OFF