Konica Minolta bizhub C31P - Manual (Page 59)

How to Use the PageScope Data Administrator 3
PageScope Data Administrator 3-51
3.11 Automatic Creation of Boxes
Configure the automatic creation of boxes when users are added. This set-
ting can be used for both single device settings and bulk copy.
Configure Automatic Box Creation
1
Start the Data Administrator to display main window.
– For details of the method for displaying the main window, refer to
page 3-1.
2
Select [Option] - [Authentication/Address setting option] from the [Tool]
menu.
3
Select [Enable automatic user box creation], and click [OK].
– Enable automatic user box creation:
Select this to enable automatic creation of boxes when users are
added. Enabling this function when very large numbers of users (for
example several hundred) are added will make writing operations
take a very long time. When large numbers of users are being writ-
ten to the device, it is recommended that this function be disabled.
– Disable automatic user box creation:
Select this to disable automatic creation of boxes when users are
added.
Box settings are configured.