Konica Minolta bizhub C31P - Manual (Page 103)

APPENDIX 4
PageScope Data Administrator 4-3
4.2 Weekly Timer Template Setting Items
4.3 What Do I Do If this Message Is Displayed?
Permit print of transmit
function for outside user To permit print for transmit functions for public users authenticated
on a network server, select
Allow .
To not permit print for transmit functions for public users authenti-
cated on a network server, select
Restrict .
Settings item name Details
Settings item name Details
Mon. ~ Sun. Set timer individually for each day.
• Restrict usage times: Select this to configure the timer for this
day.
• Usage start: set from 00: 00 to 23: 59.
• Usage end: set from 00: 00 to 23: 59.
Off function settings at
lunchtime Specify whether or not to turn the device power off at the specified
time.
• Off at lunchtime: Select this in order to turn the device power off
at the specified time.
• Lunchtime OFF: set from 00: 00 to 23: 59.
• Restart time: set from 00: 00 to 23: 59.
Set a password for using
during off-hours Set this in order to enable use of the device while the weekly timer
has turned the device power off.
• Use during off-hours: Select this in order to enable use of the de-
vice while the weekly timer has turned the device power off.
• Password: Input the password with a maximum of 8 characters.
Message Details of Error
Please input appropriate
IP address Incorrect IP address range. Change the end IP value.
Duplication error Identical data is already registered. Identical data can not be regis-
tered.
LDAP connection error Confirm that LDAP server data in the LDAP server settings is correct.
Failed to update XXX Failure in refreshing XXX device data. Confirm that the device is
ready, and try again.
Failed to delete XXX Failure in deleting XXX device data. Confirm that the device is ready,
and try again.
Failed to set XXX Failure in writing XXX device data. Confirm that the device is ready,
and try again.
Failed to get XXX Failure in acquiring XXX device data. Confirm that the device is
ready, and try again.
A data is empty Displayed if there is no data in the device to be read, when importing
data from a device using the import from device function.
The password is differ-
ent The input password and that input for confirmation do not match. In-
put both passwords again.