Konica Minolta BIZHUB C30P - Manual (Page 18)

3 Printer Agent Configuration
11
3.2 Configuring a Printer Agent
When creating either a Public Access Printer or a Controlled Access Printer,
the same Create Printer Agent dialog appears. After completing the dialog,
the KONICA MINOLTA PageScope NDPS Gateway dialog appears.
A list of device names and their corresponding IP address is displayed in the
KONICA MINOLTA PageScope NDPS Gateway dialog.
Note
• To detect devices located in other subnets, click the [Advanced]
button. Refer to section 3.4 for details.
• To add a single devices located in another subnet, click the [Add
Device] button, and then following the instructions explained in
section 3.3.