Konica Minolta Magicolor 2490MF - Manual (Page 59)

Loading Media 47
Loading Media
Take off the top and bottom sheets of a
ream of the media. Holding a stack of
approximately 200 sheets, fan the stack
to prevent static buildup before inserting
it in a tray.
"
Do not fan transparencies.
Note
Although this machine was designed for printing on a wide range of
media types, it is not intended to print exclusively on a single media
type except plain paper. Continuous printing on media other than plain
paper (such as envelopes, labels, thick stock, transparencies, or glossy
media) may adversely affect print quality or reduce engine life.
When refilling media, first remove any media remaining in the tray. Stack it
with the new media, even the edges, then reload it.
Do not mix media of different types and sizes, as this will cause media mis-
feeds.
Tray 1 (Multipurpose Tray)
For details on the types and sizes of media that can be printed from Tray 1,
refer to “Specifications” on page 38.
Loading Plain Paper
1