Konica Minolta bizhub C3350 - Manual (Page 50)

[Introduction] 7-3
7.1 Names and functions of Control Panel keys 7
4 Reset Press this key to reset the settings you entered or changed on the
Control Panel.
5 Stop Press this key to temporarily stop an active copy, scan, or print job.
To restart, press the Start key.
6 Start Press this key to start an operation such as copying, scanning, faxing,
or printing.
•
Lights up blue: This machine is ready to start operating.
• Lights up orange: This machine is not ready to start operating.
Note
If this indicator lamp lights up orange, check whether any warning or
message is displayed on the Touch Panel.
7 Register Key 1 to Reg-
ister Key 3 Press each key to switch the display of the Touch Panel to a function
assigned to a Register key.
•
The default function assigned to the Register key varies depend-
ing on the region the machine is used in.
• A function to be assigned to a Register key can be changed to suit
your environment. For details, refer to page 7-11.
8 Power key Press this key to switch this machine to Power Save mode.
For details, refer to page 4-4.
9 Warning Indicator Indicates the status of this machine by the lamp color, flashing, or a
lamp lighting up.
•
Flash in orange: Warning
• Lights up orange: The machine has stopped.
No. Name Description