Konica Minolta bizhub C3350 - Manual (Page 25)

[Introduction] 3-6
3.2 Checking the option configuration 3
3.2 Checking the option configuration
List of optional components
No. Name Description
1 Authentication Unit
AU-201 Performs user authentication by scanning information recorded on
the IC card.
2 Working Table WT-
P02 Provides an area to temporarily place an original or other materials.
This is also used when the Authentication Unit or Finisher is in-
stalled.
3 Finisher FS-P03 Staples the printed sheets.
For staples, use Staple Kit SK-501.
4 Keypad KP-101 Located on the side of the Control Panel.
Allows you to enter numbers by using the Hardware Keypad.
5 Paper Feed Unit PF-
P13 Allows you to load up to 500 sheets.
There are two slots in which the Paper Feed Unit can be installed.
6 DESK DK-P03 Used to install this machine on the floor.
This component may not be able to be used depending on the region
the machine is used in.
The following optional components are built into this machine and are not shown in the figure above.
7 Fax Kit FK-512 Used to operate this machine as a fax machine.
This is provided as standard on bizhub C3850 models sold in North
America.
8 Mount Kit MK-738 This unit is required to install the Fax Kit.
This is provided as standard on bizhub C3850 models sold in North
America.
9 Mount Kit MK-P02 Required to have Authentication Unit built in to the main unit.
5 6
2
1
3
4