Konica Minolta bizhub 181 - Manual (Page 31)

2 Installing the printer driver
2-18 GDI Printer Controller
4
Click “Add a printer” in the toolbar.
“Add Printer” dialog box appears.
5
Click “Add a local printer”.
“Choose a printer port” dialog box appears.
6
Select “LPT1: (Printer Port)” of “Use an existing port”, and then click
the [Next] button.
– In order to print on a network, the connection port must be set up
as a network port. Since the port settings can be specified after in-
stallation, this procedure describes how to install the printer driver
for a local connection. For details on specifying the port settings,
refer to the User’s Guide for the network interface card.
7
Click the [Have Disk] button.
8
Click the [Browse] button, select “\Driver\WinVista\English” on the CD-
ROM, and then click the [Open] button.