Konica Minolta bizhub 181 - Manual (Page 14)

Installing the printer driver 2
GDI Printer Controller 2-1
2 Installing the printer driver
Descriptions on connecting the machine to a computer and installing the
printer driver are provided below.
2.1 Making connections and installing the driver
Connecting to a computer
This machine can be connected to a computer using any of the following
connection methods.
Connecting to a USB port
In the following procedure, the machine is connected directly to the compu-
ter by using a USB cable.
When the machine is connected to the USB port, installation of the TWAIN
and printer drivers begins. For the procedure on installing the TWAIN and
printer drivers when this machine is connected by USB, refer to “Installing
the printer driver by using Plug and Play” on page 2-6.
2
Note
This machine cannot be connected to a computer running Windows 98
SE using a USB interface.