Konica Minolta bizhub 181 User Manual
Page 28
Installing the printer driver
2
GDI Printer Controller
2-15
–
If “Printer Tasks” does not appear, double-click the “Add Printer”
icon.
The Add Printer Wizard starts up.
4
Click the [Next] button.
5
Select “Local printer attached to this computer”, and then click the
[Next] button.
–
The “Automatically detect and install my Plug and Play printer”
check box should be cleared.
–
In order to print on a network, the connection port must be set up
as a network port. Since the port settings can be specified after in-
stallation, this procedure describes how to install the printer driver
for a local connection. For details on specifying the port settings,
refer to the User’s Guide for the network interface card.
6
Select “LPT1: (Recommended Printer Port)” beside “Use the following
port”, and then click the [Next] button.
7
Click the [Have Disk] button.
8
Click the [Browse] button, select “Driver\WIN2K_XP\English” on the
CD-ROM, and then click the [Open] button.