Konica Minolta bizhub C450P - Manual (Page 21)

2 Administrator Operations
2-4 C450P
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
4
Press the [+] and/or [,] key to enter the 8-digit Administrator Pass-
word.
– Press the [*] or [)] key to move the cursor (digit).
– Press the [*] key to clear the value entered.
5
Press the [Menu/Select] key.
? What happens if a wrong Administrator Password is entered?
% If a wrong Administrator Password is entered, the machine gives a
message that tells that there is a mismatch in the Administrator
Passwords. Wait for a while before entering the correct Administra-
tor Password.
% If the EnhancedSecurity mode is set to “ON,” entry of a wrong
password is counted as unauthorized access. If a wrong Adminis-
trator Password is entered a predetermined number of times (once
to three times) set by the Administrator of the machine or more, a
message appears saying that the machine accepts no more Admin-
istrator Passwords because of unauthorized access for any subse-
quent entry of the Administrator Password. The machine is then set
into an access lock state. To cancel the access lock state, turn off,
and then turn on, the main power switch of the machine. When the
main power switch is turned off, then on again, wait at least 10 sec-
onds to turn it on after turning it off. If there is no wait period be-
tween turning the main power switch off, then on again, the
machine may not function properly.
6
Press the [Cancel] key to log off from the Admin. Setting mode.
c450P_security_E.book 4 ページ ２００７年４月１０日 火曜日 午後６時４９分